Finepart | Finecut Waterjet Machines | Options | Machine Monitoring​
Water pressure monitoring

Machine Monitoring​

Optional signal tower that lights up when actual parameters deviates from settings. The Alarm signal is visible in the machine HMI panel and alarm light, visible across the workshop.

Options No. 6002800 ​

Machine pressure sensor

Signal in the HMI panel to let your know your actual pressure levels at the nozzle, rather than at the pump.

A high-pressure sensor placed in the high pressure line just before entering the machine workspace ensures that you know your actual pressure levels at the nozzle rather than at the pump. ​

The sensor reading is integrated in the control system and is presented in the Finesoft HMI.

Especially when you have a long distance between pump and machine, or if you have several machines at different distances from the pump, this option allows you to optimize your cutting parameters for most efficient and economic operation.​

Machine pressure sensor

Options No. 6002900 ​

Exterior signal tower​

Signal tower indicates of any machine status deviates from defined settings that impacts the cut quality.

The machine has indication of messages and alarms on the HMI, but the signal tower is visible far away from the machine and warns that action is needed.

The external light tower will show the following:

  • A flashing red light if the front door is open.
  • A solid red light is an alarm has occurred.
  • A solid green light if a cycle is running.
  • A solid orange light if the cycle is in hold.

Suitable if you have few operators to cover a big work area. To increase visibility a light tower can be used to visually indicate machine status from a distance in the work shop. Light tower feature green, yellow and red light signals from the controller. Mounts on machine top cover.

Water pressure monitoring

Speak With A Waterjet Specialist